Evaporator
Cooling capacity
At 0 C0 (2kw- 46.6 kw)
At -10 C0 (1.7 kw- 34.6 kw)
At -25C0 (1.12 kw- 20.8kw)
Diameter (250 -300 -400-450-500) mm
Number of fan (1-2-3-4)
Evaporator
Cooling capacity
At 0 C0 (2kw- 46.6 kw)
At -10 C0 (1.7 kw- 34.6 kw)
At -25C0 (1.12 kw- 20.8kw)
Diameter (250 -300 -400-450-500) mm
Number of fan (1-2-3-4)
Evaporator
Cooling capacity
At 0 C0 (2kw- 46.6 kw)
At -10 C0 (1.7 kw- 34.6 kw)
At -25C0 (1.12 kw- 20.8kw)
Diameter (250 -300 -400-450-500) mm
Number of fan (1-2-3-4)
Air Coolers produced with copper pipes are designed as exterior and interior design.
It is manufactured as staggered with a pipe diameter of 1/2″ and a wall thickness of 0.35 mm.
Aluminum fins with wavy surfaces are used and fin spacing is between 6-8 mm, mold geometry is designed as 40×35 mm.
End plates are produced from aluminum in order to protect the copper pipes used in the Coils.
Refrigerant Distributor and Copper Collector are used.
Casing
Air Coolers cabinets are produced from galvanized steel by being painted with RAL 9016 Electrostatic paint, which is resistant to different weather conditions.
Fans
Ø250, Ø300, Ø350, Ø400, Ø450, Ø500 mm fans are used in GNA Series Commercial Type Air Coolers.
Optional fan model changes can be applied.
Defrost
Optional E1 or E2 defrost systems can be applied according to the usage conditions.
Capacity
Capacities are calculated with EN 328 Standards for R404A gas according to European fans.
Test
Standard Room Coolers are tested with 40 bar and 6 bar nitrogen loaded in.
